Lock Morticer
This door lock morticer is ideal for home or trade applications, it is guaranteed to save time and is intuitively easy to use. For use on softwood, hardwood and fire doors from 30mm to 85mm thick. It has been designed to cut mortices for door locks and will also cut a recess for the lock’s faceplate. Produce mortices up to 100mm deep and cut the recess for a face plate to sit in with this one tool.
After initial assembly simply choose the correct sized cutter for your lock, mark the position of the lock body and face plate on the door and clamp the jig to your door over where you require the mortice. Make sure the vertical and horizontal depth stops are positioned correctly and the guide bush runs smoothly up and down the shafts. There is a handle at the base of the morticer which is used to reposition one of the bars if the guide bush does not run smoothly. Fix your drill to the shaft and move the guide bush up and down to drill your mortice. The jig is supplied with 3 sizes of cutters to accommodate the most popular lock widths. The lock morticer can also be used to bore out holes in the face of the door and is supplied with a protective cap to allow you to do this without marking your door.
All industry standard power drills are compatible providing they have a 13mm chuck and can reach speeds of between 2,000 and 3,000rpm. Constructed from steel and aluminium the jig is sturdy and durable, the clamping jaws have rubber faces which will not mark your door. Supplied in a blow moulded carry case which contains the jig, 3 different sizes of cutter, measuring rule and 2 x adjusting wrenches. ©
