Router Bit Set – Tongue & Groove Edge Banding
TCT Router Bits
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.
Tongue & Groove Edge Banding Bits
This 2 piece edge banding TCT router bit set allows you to hide unsightly edges on your plywood and MDF projects by creating a precise tongue and groove profile using the matched male and female router bits. Featuring a 120° angle with an interlocking tongue and groove to create a larger surface area for glue application giving you long lasting edges on your panels and shelves. Simply centre the male router bit on the stock and make the cut, then match up the female router bit with the centre point of your first cut. Finish your edge banding with your choice of solid wood, gluing together the two pieces. Minimum stock thickness for these bits is 12.7mm and the maximum thickness is 25.4mm. Shanks are 1/4″.
Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. ©
