Dust Hose Connector – 100mm to 63mm
This fitting will connect industry standard 102mm outside diameter dust hose to 63mm dust hose by simply pushing the relevant hoses over each end of the fitting. The walls of the fitting are parallel and as such the hoses with need to be held in position using key clamps.
This hose fitting is made from a thermoplastic polymer, which is impact resistant, has structural strength and stiffness and will not flex or distort under pressure. It has excellent low temperature properties and will perform in extremely cold workshops down to -40°C. The internal bore is smooth to ensure the smooth passage of dust. As all of our fittings are made to exacting and tight tolerances to prevent air loss, a top tip is to use a washing up liquid as a lubricant when initially installing. ©
