Dust Hose Stepped Adaptor – 100mm to 35mm
This adaptor consists of 4 individual fittings that can be either be press fitted together or can be used individually to join dust hoses of different diameters. You can use all four, three, two or use individually to suit your need. Each of the four sections has a slight taper to accept varying dust hose diameters. Fitting one is 35mm to 35mm, fitting two is 40mm to 40mm, fitting three is 45mm to 62mm and fitting four is 68mm to 98mm.
This hose fitting is made from a thermoplastic polymer, which is impact resistant, has structural strength and stiffness and will not flex or distort under pressure. It has excellent low temperature properties and will perform in extremely cold workshops down to -40°C. The internal bore is smooth to ensure the smooth passage of dust. As all of our fittings are made to exacting and tight tolerances to prevent air loss, a top tip is to use a washing up liquid as a lubricant when initially installing. ©
